Hi Visitors: Please Use Paid Antivirus On Your Computer or Mobile. Avoid Any Ads OR Bad links On This Site. Still, Use Them At Your Own Risk. We Are Not Responsible if These May Cause Any Harm To Your Computer or Mobile. Thanks

Download Canon Service Tool V3400 (maintenance and reset) – 2022 Updated

SKDMAN
3 Min Read

Download Canon Service Tool V3400 (maintenance and reset)

Canon Service Tool V3400 can perform service adjustments and reset procedures with the absorbent ink counter. To reset the waste ink absorber counters, you must use the V3400 service tool in Windows XP or under another Windows operating system in compatibility mode.

Canon Service tool v3400 Free Download. After changing parts such as ink absorbents, print heads, and printer mainboards, Canon Service Tool is used to service and reset Canon printers. Based on the various cases we’ve seen, the Service Tool is most often used to reset the waste ink counter value when the waste ink absorber is full. When the waste ink absorber reaches capacity, it must be replaced or cleaned. Once the waste ink absorber has been replaced or cleaned, the repairs proceed by resetting the waste ink counter value. The Service Tool may be used to reset the waste ink counter value.

Features Canon Service Tool:

CANON Service Tool V3400 for all IP series, MG series, iX series, MP series printers work under Windows OS only.

Some of the supported printer models for work with Service Tool V3400:

MP230, MP237, MP258, MP270, MP278, MP280, MP287, MP490, MP540 etc

IX6500, IX6510, iX6840 etc

iP2700, iP3600, iP4800, iP4810, iP4840, iP4900, iP4910, iP4940, iP4970, iP4980, iP4990, iP5810, iP5880, iP7240 etc

PRO9000 etc

MX410

MG2120. MG2140, MG2240, MG2270, MG3140, MG3540, MG4140, MG5140, MG5240, MG5270, MG5340, MG5450, MG6140, MG6150, MG6240, MG8140, MG8240

MX394

Changelog!!!

Improvement
Bug fixes
Force close fix
Supported Windows 11

How To Use?

  1. Download Canon Service Tool V3400
  2. Set the printer to Service Mode 
  3. Run the Service Tool V3400.exe program
  4. Select the connected USB port number from the USB PORT
  5. In the Ink Absorber Counter section of the Service Tool, select MAIN from the Absorber pull-down menu.
  6. From the Counter Value (%) pull-down menu, select the value (in 10% increments) which is the closest to the actual counter value confirmed before the replacement of the logic board and click SET. 
  7. Print EEPROM information to confirm that the value is properly set to the EEPROM. 

Download Links:

FileInformation
NameCanon Service Tool V3400
Size9.5 MB
LinkHere

README:

Compatibility:The tool runs perfectly on Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, and Windows 10 (32-bit and 64-bit).

Take a Backup: If you are willing to try the above tool, then please take a backup of your personal data from your Android Smartphone or Tablet. As flashing any Firmware or recovery may brick the device.

Credits: Canon Service Tool is created and distributed by the developer. So, full credits go to the developer for sharing the tool for free.

Share this Article
By SKDMAN
Follow:
I Am Sanjoy Kumer.

Adblock

Please Disabling your ad-blocker

Refresh Page